Products

Showing all 227 results

AIR VENT
The AirVent roof ventilator is made of elastic material, fully compatible with the bituminous waterproofing membrane and very resistant to sunlight. It is an essential component of an bituminous waterproofing system with a ventilated layer
€1.00
ANGLED ROOF DRAIN WITH RECTANGULAR INTERSECTION
Curve – fitting made of special synthetic rubbers’ compound suitable for application with all kinds of bituminous membranes. Resistant to UV radiation and atmosphere chemical agents
€11.53
BASE FOR SLABS 15 mm WITH HOLE
Plastic Bases for prefabricated slabs quickly and easily resolve problems arising from the installation of a paving system. They are placed directly on to the waterproofing cap sheet. The paving slabs are then placed directly onto them without the use of concrete or adhesives of any sort
€0.45
BEBIT G & BEBIT G PLUS
BEBIT asphalt reinforcement grids are made out of glass fi bers with a melting point of more than 850˚C due to their specifi c properties, BEBIT G and BEBIT G plus asphalt reinforcement grids can take high tensile stress and also qualify for their low elongation
€0.00
BITUMINOUS EMULSION ESHABIT JP
ESHA bituminous emulsions consist of small bitumen droplets, 1-10 microns, dispensed in an aqueous continuous phase. Bituminous emulsions are used in the road building sector, as well as in the Runways’ construction
€0.00
Bituminous Emulsion ESHACOAT-PME-S-C60BP5 – suitable for slurry sealing and microsurfacing
ESHA bituminous emulsions consist of small bitumen droplets, 1-10 microns, dispensed in an aqueous continuous phase. Bituminous emulsions are used in the road building sector, as well as in the Runways’ construction
€0.00
BITUMINOUS EMULSION ΚΕ1 – suitable for tack coats
ESHA bituminous emulsions consist of small bitumen droplets, 1-10 microns, dispensed in an aqueous continuous phase. Bituminous emulsions are used in the road building sector, as well as in the Runways’ construction
€0.42
BITUMINOUS EMULSION ΚΕ2 – suitable for sealing coats and aggregate coating
ESHA bituminous emulsions consist of small bitumen droplets, 1-10 microns, dispensed in an aqueous continuous phase. Bituminous emulsions are used in the road building sector, as well as in the Runways’ construction
€0.42
BITUMINOUS EMULSION ΚΕ5 – suitable for impregnation of road bases
ESHA bituminous emulsions consist of small bitumen droplets, 1-10 microns, dispensed in an aqueous continuous phase. Bituminous emulsions are used in the road building sector, as well as in the Runways’ construction
€0.49
BOARD POW
POW Board is made of steel zinc plated or aluminium zinc and dimension 80 x 40 mm. Packaging 100/box
€0.14
CEMELAST LIQUID
Vandex Cemelast Liquid is a polymer-based elasticiser that, when added to the Vandex BB 75 cementitious waterproofing coating, imparts flexibility to it. It is recommended for waterproofing surfaces where cracking or deformation is likely to occur
€10.96
CURVE Φ100 100×100
Curve – fitting made of special synthetic rubbers’ compound suitable for application with all kinds of bituminous membranes. Resistant to UV radiation and atmosphere chemical agents
€0.00
DANODREN H15 PLUS
HDPE drainage membrane dimple height 7,5 mm, weight 500gr/m2 with polypropylene geotextile on one side
€6.56
DANOPOL FV
DANOPOL FV is a synthetic PVC plasticized membrane, reinforced with Fibre glass mat. Designed for flat roof waterproofing, U.V. resistant
€10.51
DANOPOL HS
DANOPOL HS is a synthetic PVC plasticized membrane, reinforced with polyester net carrier. Designed for flat roof waterproofing, U.V. resistant
€11.42
DANOSA COLAMINATED BOARD
PVC-p laminated metal sheet, used as waterproofing finishing in both vertical and horizontal surfaces
€111.92
DANOSA GLUE DAN PVC
Used as adhesive for Danopol membranes. Contact adhesive liquid and transparent, suited for bonding waterproof PVC membranes on the most common construction materials
€21.43
DANOSA PVC EXTERNAL CORNER
External prefabricated PVC-p corner, for exterior roof angles. Used as an accessory of DANOPOL PVC membranes, to ensure waterproofing in exterior roof angles
€4.89
DANOSA PVC INTERNAL CORNER
Internal prefabricated PVC-p corner for interior roof angles. Used as an accessory of DANOPOL PVC membranes, to ensure waterproofing in interior roof angles
€4.02
DANOSA PVC LIQUID
Liquid PVC used for sealing DANOPOL membranes welding joints
€27.23
DANOSA THF
Solvent TETRAHYDROFURAN (THF) to carry out chemical welding on membranes DANOPOL
€18.90
DRAIN E 400
HDPE drainage membrane dimple height 7,5 mm, weight 400gr/m2
€1.48
DRENOTEX
DRENOTEX geotextiles are Polyester needlepunched nonwooven geotextiles, without chemical binders, with great mechanical strength. They are produced by Freudenbergpolitex and are represnted to Greek Maket by ESHA
€0.70
ESHA GEO
ESHA GEO is specially designed for waterproofing of underground and vertical walls and for horizontal underground structures. It is produced by a special type of oxidized bitumen mixed with particular additives and plasticizers, that becomes extremely effective in waterproofing applications
€8.51
ESHA PERIMETRIC FILLET
ESHA Perimetric Fillet is a ready prefabricated perimetric fillet that helps the smooth rise of asphalt membranes from horizontal surface of roof to vertical parapet
€10.15
ESHA ROAD LIFT
Esha Road-Lift is rapid setting modified bituminous emulsion, designed for selaing capillary cracks that appear on old asphalt pavements, while stabilizing loose aggregates, restoring asphalt pavement to its prior condition. As a result extend life cycle and service life of asphalt pavement, is achieved
€2.10
ESHA UNIVERSAL
ESHA UNIVERSAL is a POCB (PolyOlefin Copolymer Bitumen binder), which is a form of modified bitumen membrane that has the low temperature performance of a SBS membrane and the high-end performance of an APP one. The result is a strong, flexible, and extremely stable single-ply waterproofing layer with very high puncture resistance
€20.14
ESHA-IZOTON PRIMER – suitable for tack coat of bridge Deck wateroroofing system
ESHA bituminous emulsions consist of small bitumen droplets, 1-10 microns, dispensed in an aqueous continuous phase. Bituminous emulsions are used in the road building sector, as well as in the Runways’ construction. Curing procedure starts as soon as they are applied on either the road surface or the aggregates and finally the remaining bitumen acts as binder
€0.00
ESHABAR-PARAPET FIXING BAR
ESHABAR is a galvanized prefabricated «blunt Γ» shaped metal strip, perforated with holes, diameter 6.0 mm, every 200 mm. It is used on parapets or other vertical surfaces as a fixing element, for the mechanical fastening (anchoring) of the bituminous waterproofing membranes
€5.03
ESHABOND
ESHABOND is an acrylic dispersion for concrete and mortar modification which improves mortar properties
€1.00
ESHACOAT 6S
EshaCoat 6S is a high grade elastic bituminous waterproofing emulsion based on purified bitumen, synthetic latex, resins and additives. It is used for waterproofing of every surface and particularly concrete
€2.06
ESHACOAT No2
EshaCoat No2 is a bituminous emulsion with fillers, for waterproofing surfaces of most common structural elements and particularly concrete. A continuous, inflammable watertight film is formed after water evaporation, with excellent adhesion properties to the substrate
€0.78
ESHADACH 150
Vapour permeable roof underlay manufactured as multilayer product consisting of reinforced mesh, laminated with non-woven protective sheet for ventilated pitched roof construction with timber sarking. The underlay needs to be installed with recommended overlap
€1.75
ESHADACH 170
Breather waterproof roofing underlay manufactured by thermally bonding outer spunbonded polypropylene layers and inner layer of microporous polypropylene film for pitched supported or unsupported roof construction without sarking and can be used also for vertical wall construction as wind barrier
€1.91
ESHADACH 95
Breather waterproof roofing underlay manufactured by thermally bonding outer spunbonded polypropylene layers and inner layer of microporous polypropylene film for pitched supported or unsupported roof construction without sarking and can be used also for vertical wall construction as wind barrier
€1.18
ESHADESMOBIT 1K
ESHADESMOBIT 1K is one component polyurethane-bitumen waterproofing coating, for horizontal and vertical surfaces, based on elastomeric PU and bituminous resins
€4.00
ESHADESMOBIT 2K
ESHADESMOBIT is a two component (Α+Β) POLYURETHANE –BITUMEN waterproofing compound. When cured, it provides a permanent highly elastic bubble free, seamless membrane with strong adhesion to a wide range to all construction elements, excellent crack bridging and vapour barrier properties
€7.58
ESHADESMOLAST
ESHADESMOLAST is an one component elastomeric waterproofing coating for horizontal surfaces, based on hydrophobic polyurethane resins. When in contact with ground and air moisture it polymerizes and creates a flexible and coherent membrane
€4.33
ESHADESMOLAST HRD
ESHADESMOLAST HRD is one component, solventbased waterproofing coating for horizontal surfaces subjected to high mechanical stress, based on aliphatic polyurethane resins
€13.01
ESHADESMOLAST PRIMER AQUA 2K
ESHADESMOLAST PRIMER AQUA 2K is a two component water based epoxy coating. Its main use is as primer for adhesion improvement of polymer waterproofing coatings such as ESHADESMOLAST, ESHAHYBRID & ESHACRYCOAT
€7.10
ESHADESMOLAST PRIMER PU
ESHADESMOLAST PRIMER PU is a high grade one component polyurethane based fluid that cures with the atmospheric humidity. It’s composition is based on polyurethane elastomers
€6.76
ESHADESMOLAST PRIMER PUB 2K
ESHADESMOLAST PRIMER PUB 2K is a liquid, two-component, polyurethane primer for improving the adhesion of several ESHA PU based products on porous substrates. ESHADESMOLAST PRIMER PUB 2K does not contain any solvents
€12.82
ESHADESMOLAST TR
ESHADESMOLAST TR is an one component, crystal clear, solvent-based, liquid applied waterproofing membrane based on aliphatic PU resins. ESHADESMOLAST TR exhibits high endurance to UV radiation (it will not yellow) and excellent mechanical, chemical resistance properties
€18.66
ESHADESMOSEAL
ESHADESMOSEAL is a one component, liquid-applied, silane-based, elastomeric waterproofing coating for horizontal surfaces. It cures with the air moisture and forms a strong, flexible and coherent membrane
€11.05
ESHADESMOTHINNER
ESHADESMOTHINNER is a thinner that contains a special blend of pure solvents. It is used as a thinner for polyurethane coatings such as ESHADESMOLAST for better and easier use
€4.94
ESHADESMOTOP
ESHADESMOTOP is an one component elastomeric waterproofing liquid applied membranes based on aliphatic polyurethane. It cures with the atmospheric humidity producing an elastic bubble free waterproofing & protection layer
€12.77
ESHADIEN (SBS -20°C)
Elastomeric waterproofing membranes EshaDien are produced from special bitumen, modified with thermoplastic elastomeric materials (SBS)
€5.73
ESHADIEN Antiroot B5 (SBS -20°C)
Elastomeric waterproofing membrane EshaDien Antiroot B5 is a part of EshaOxygen Green Roof System, developed by Esha. It is an elastomeric bituminous membrane with extremely effective antiroot properties
€11.19
ESHADIEN GEO (SBS -20°C)
Elastomeric waterproofing membrane EshaDien Geo is produced from special bitumen, modified with thermoplastic elastomeric materials (SBS). It is specially designed for waterproofing of underground and vertical walls and for horizontal underground structures
€10.83
ESHADIEN SP GEO
(SBS -20°C)
€12.50
ESHADIEN ULTRA WHITE (SBS -20°C)
Revolutionary elastomeric waterproofing membranes ESHADIEN Ultra White are produced from special bitumen, modified with thermoplastic elastomeric materials (SBS)
€17.50
ESHADRAIN 400
HDPE drainage membrane dimple height 7,5 mm, weight 400gr/m2
€1.73
ESHADRAIN 500
HDPE drainage membrane dimple height 7,5 mm, weight 500gr/m2
€2.05
ESHADRAIN R20 GARDEN
Drainage membranes ESHADRAIN R-20 consists of High Density Polyethylene (H.D.P.E) nodular sheet ingreen colour. The drainage capability of membranes ESHADRAIN R-20 is based on the existence this nodular configurations that creates the appropriate gap in order to control the water out of the drainage area
€10.72
ESHADURO (APP -5°C)
Plastomeric waterproofing membrane ESHADURO is produced from special types of bitumen and selected polymer materials based on propylene (APP)
€4.12
ESHADURO (APP -5°C) Red Granule
Plastomeric waterproofing membrane ESHADURO is produced from special types of bitumen and selected polymer materials based on propylene (APP)
€7.27
ESHAELASTAN (SBS -15°C)
Elastomeric waterproofing membranes ESHAELASTAN are produced from special bitumen, modified with thermoplastic elastomeric materials (SBS)
€7.39
ESHAELASTAN S (SBS -20°C)
Elastomeric waterproofing membranes ESHAELASTAN-S are produced from special bitumen, modified with thermoplastic elastomeric materials (SBS)
€7.03
ESHAELASTIC
EshaElastic is a high grade, hyper-elastic bituminous waterproofing emulsion. It is composed of purified bitumen, synthetic elastomers, resins, and anti-stripping agents
€3.81
ESHAEPOGRAN
EshaEpogran is a general purpose self priming 2 component coal tar epoxy adhesive for metals, concrete, road reflectors (cat’s eyes), filling up small road joints and cracks etc. It exhibits an excellent adhesion & abrasion resistance and is highly recommended for seawater under surface service
€0.00
ESHAEPOXYTAR
ESHAEPOXYTAR is a two part pitch-tar epoxy coating with anticorrosive, antirust and waterproofing properties. It can be applied to metal and concrete surfaces. It forms a black, hard surface, resistant to acid and alkali solutions, saline water, petroleum products etc
€17.92
ESHAFAST
EshaFast is a bituminous varnish used mainly for priming concrete surfaces to increase bonding of bituminous waterproofing membranes, which dries fast and provides a durable and uniform waterproofing film
€2.40
ESHAFILL
ESHAFILL is a ready to use cold asphalt mix and it is used to restore small damages on pavements and small pot holes. It consists of a special asphalt binder with elastic properties, special graded aggregates and special additives which give ESHAFILL excellent workability, substrate adhesion, and cohesiveness
€0.44
ESHAFIN (SBS -10°C)
Elastomeric waterproofing membranes ESHAFIN are produced from special bitumen, modified with thermoplastic elastomeric materials (SBS)
€4.64
ESHAFLEX 2K/EL
ESHAFLEX 2K-EL is an elastic bituminous two-component paste for the waterproofing of construction concrete elements. It's free from solvents and asbestos
€1.90
ESHAFX
Fibre reinforced mortar for external thermal insulation application
€0.34
ESHAFX PRIMER
EshaFX Primer is an impregnating primer, acrylic based, for use before the application of EshaFX Top series polymeric renders
€1.95
ESHAFX TOP A
EshaFX Top A is an acrylic, pasty, water-repellent, ready to use render for final coating. It is available either white or colored, with different size of granules depending on the desired decorative effect of the surface
€1.46
ESHAFX TOP S
EshaFX Top S is a silicon, pasty, water-repellent, ready to use render for final coating. It is available either white or colored, with different size of granules depending on the desired decorative effect of the surface
€0.00
ESHAGUM (APP -10°C)
Plastomeric waterproofing membrane ESHAGUM is produced from special types of bitumen and selected polymer materials based on propylene (APP)
€7.31
ESHAGUM Antiroot B5 (APP -10°C)
Plastomeric waterproofing membrane ESHAGUM ANTIROOT B5 is a part of EshaOxygen Green Roof System, developed by Esha
€11.26
ESHAGUM SP (APP -10°C)
ESHAGUM SP are plastomeric waterproofing membranes for waterproofing concrete Bridge-Deck and underground structures
€11.77
ESHAGUM SP-FR (-15°C)
ESHAGUM SP-FR is specially engineered for durability, significantly reducing the risk of fire spread and fume emission. It selectively promotes a heat-consuming char formation, enhancing fire resistance
€13.97
ESHAHYBRID
ESHAHYBRID is a one-component hybrid-based elastomeric waterproofing coating. It is used for waterproofing and protection of the surfaces. Its composition is a combination of elastomeric aliphatic polyurethane and acrylic polymers. Its final hydrophobic membrane does not shrink or crack and remains flexible at large temperature changes
€4.89
ESHAHYDROBENT
ESHAHYDROBENT is an expanding waterstop, based on bentonite and butyl rubber, intended for prevention of water filtration through technological joints in concrete or reinforced concrete constructions, by expansion and sealing of the joints
€4.88
ESHAIZOTON APJ
ESHA-IZOTON-APJ System is a hot, in situ application system for waterproofing and sealing transverse joints ofmetal or concrete bridges, consisting of a combination of special grading of hard aggregates and special elastomeric bituminous binder, to form a box-shaped gasket that overlaps the underlying bridge cross-section at least 25 cm wide on either side of its longitudinal axis
€0.00
ESHALAC 50S
EshaLac 50C is a high penetration bituminous primer (conforming with ASTM D-41). It is used mainly for priming concrete surfaces to increase bonding of bituminous waterproofing membranes
€2.58
ESHALAS – PREFABRICATED, SELF-ADHESIVE, COLD APPLIED BITUMEN-POLYMER SEALING & CONNECTION STRIP
ESHALAS is an elasto-plastic jointing strip made of bitumen modified with «SBR» type thermoplastic elastomers, extruded, preformed and industrially prefabricated, self-adhesive, cold applied, ready for use
€0.00
ESHALUMIN
EshaLumin is a bitumen based aluminium paint designed for the protection of exposed bituminous surfaces and the anti-corrosive protection of metal surfaces. It consists of bitumen, solvents, aluminium pigments and various additives
€5.93
ESHAMODIBIT
ESHAMODIBIT G3045 is a durable asphaltic binder for roads and mainly for base courses, where high stiffness is required. Even though EshaModibit has a considerably lower penetration, it can be compacted at the same or even lower temperature than the conventional asphalt mix, making it the most environmentally friendly as well as cost effective binder solution for paving
€0.00
ESHAPER-AL
EshaPer-Al is a perforated bituminous membrane, composed of plastomeric bitumen, perforated glass-fleece reinforcement, quartz sand top cover and perforated aluminium bottom cover. Its total weight is 1.5 kg/m2
€4.83
ESHAPERFO
EshaPerfo is a perforated bituminous membrane, composed of plastomeric bitumen, perforated glass-fleece reinforcement and polyethylene top and bottom covers. Its total weight is 1.1 kg/m2
€4.11
ESHAPOLYBLACK
EshaPolyblack is a water-based (new generation) elastomeric sealant for horizontal and vertical surfaces. It is a one-component, asphalt-polyurethane base suitable for waterproofing and protection
ESHAPOLYPHALT A+B
ESHAPOLYPHALT is a cold applied high grade, self levelling, elastomeric, two component (Α+Β) POLYURETHANE–BITUMEN Sealant. When cured, it provides a permanently and highly elastic jointing compound capable of wιth standing a joint movement larger than 25%
€6.80
ESHAPOLYSEAL 1K
ESHAPOLYSEAL 1K is a thixotropic one component gun-grade polyurethane-based sealant that becomes elastomeric & rigid after air contact
€5.38
ESHAPOLYSEAL A+B
ESHAPOLYSEAL (A+B) is a high grade, self levelling, elastomeric,two component (Α+Β) POLYURETHANE sealant. When cured, it pro- vides a permanently elastic jointing compound capable of wιth- standing a joint movement larger than 25%. ESHAPOLYSEAL (A+B) is a two component (Α+Β) self levelling sealant. The two components are mixed at a ratio 3,1:1 (w/w). Polymerization leads to a polyurethane rubber material. ESHAPOLYSEAL (A+B), when cured, remains elastic within the temperature range of -30° C to 100°C
€14.12
ESHAPRENE – high-quality elastomeric asphaltic binder for road applications
ESHAPRENE is a high-quality elastomeric asphaltic binder for road applications, modified with SBS thermoplastic polymer.It fullfills ΕΝ-14023
€0.00
ESHAPRENE XS- high-quality elastomeric asphaltic binder for road applications – New generation
ESHAPRENE XS is the 2nd generation of Elastomeric asphaltic binder for Road applications with enchanced antikerosine properties. It is even more environmentally friendly than EshaPrene, as it is designed to be applied at lower working tempetarures, while retaining or even improving its high quality attributes.It fullfills ΕΝ-14023. FRIENDLY TO THE ENVIRONMENT
€0.00
ESHAPRIMER 21
ESHAPRIMER 21 is a high grade one component polyurethane based protective varnish. It is also used as primer for better adhesion of joint sealants. It shows excellent adhension properties to porous construction materials. When cured produces a uniform, hard and elastic film
€6.76
ESHAPRIMER DM
ESHAPRIMER DM is a liquid primer for improving the adhesion of several ESHA products on non-porous substrates, based on a mixture of solvents and organofunctional silanes. It is a fast – drying, colorless liquid that does not stain the substrate
€9.89
ESHAPROOF (APP -7 °C)
Plastomeric waterproofing membrane ESHAPROOF is produced from special types of bitumen and selected polymer materials based on propylene (APP)
€5.95
ESHAPROOF SP (ΑΡΡ -7οC)
ESHAPROOF SP are plastomeric waterproofing membranes for waterproofing concrete Bridge-Deck and underground structures. ESHAPROOF SP are produced with special types of bitumen and selected polymer materials based on polypropylene (APP). Its special composition offer longlasting impermeability, protection and endurance of Bridgedeck even at low temperature
€0.00
ESHAPROTECT
A plastic sheet that should be placed on top of a waterproofing membrane as a slip and protection layer to protect the waterproofing membrane against static and dynamic loads.ESHAPROTECT Slip and Protection Sheets are laid loose, with overlaps of 100mm minimum. Eshastick tub, self adhesive tape can be used for sealing the overlaps
€5.88
ESHAROOF
€1.91
ESHAROOF DYNAFELT
Aσφαλτική στεγανωτική μεμβράνη κεραμοσκεπής, με οπλισμό υψηλής αντοχής, συνδυασμό πολυεστέρα-πλέγματος και επικάλυψη γεωύφασμα πολυπροπυλενίου (PP) και πλέγμα HD πολυπροπυλενίου (PP)
ESHAROOF FELT
€2.28
ESHAROOF REFLECT
€4.00
ESHAROOF S PP
€2.04
ESHAROOFCOAT No10
EshaRoofcoat 10 is a high grade, hyper-elastic bituminous waterproofing solution. It is composed of purified bitumen, synthetic elastomers, resins, and anti-stripping agents. It contains toluene
€2.83
ESHAROOFCOAT No10 ANTIROOT B5
ESHAROOFCOAT No 10 ANTIROOT B5 is a high grade, hyper-elastic bituminous waterproofing solution. It is composed of purified bitumen, synthetic elastomers, resins, and anti-stripping agents. It contains toluene
€4.14
ESHASEALACRYL
ESHASEALACRYL is one component highly elastic sealant based on acrylic resins in aqueous dispersion, with high resistance to UV radiation and weather conditions. After application water evaporates and sealant turn into a cohesive plastoelastic mass which adhere to the sides of the joint. ESHASEALACRYL can be painted with normal use paints after curing
€2.28
ESHASEALER No1
ESHASEALER Νο1 is a cold applied bituminous plastic mastic for horizontal and vertical joint sealing. It forms a hard surface while it remains plastic in its bulk. It has good adhesion to all common building materials and is able to accommodate normal movement
€2.25
ESHASEALER No164
ESHASEALER 164 is an elastomeric, hot poured bituminous Sealant. It provides a permanently elastic jointing compound capable of accommodating a joint movement larger than 20%
€1.84
ESHASEALER No164 EAK
ESHASEALER 164 is an elastomeric, hot poured bituminous Sealant. It provides a permanently elastic jointing compound capable of accommodating a joint movement larger than 20%
€0.00
ESHASEALER No2
ESHASEALER Νο 2 is a cold applied bituminous plastic mastic-putty fibre reinforced for all types of waterproofing details.It can also be used for sealing minor construction materials joints of less than 1 cm wide
€2.49
ESHASTABLER
EshaLac 50C is a high penetration bituminous primer (conforming with ASTM D-41). It is used mainly for priming concrete surfaces to increase bonding of bituminous waterproofing membranes
€0.00
ESHASTICK 3000-X
ESHASTICK 3000-X is an advanced-technology self-adhesive elastomeric bituminous waterproofing membrane. It is produced from SBS modified bitumen which exhibits impressive elasticity and enhanced viscoelastic properties even at extremely low temperatures (-40° C)
€10.39
ESHASTICK ALPES 1.2
ESHASTICK ALPES is an advanced-technology selfadhesive elastomeric bituminous waterproofing felt. It is produced from SBS modified bitumen which exhibits impressive elasticity and enhanced viscoelastic properties even at very low temperatures (-40° C)
€8.33
ESHASTICK HD 1.5
ESHASTICK HD 1.5 is a self-adhesive bituminous waterproofing felt produced from SBS modified self adhesive bitumen and top finished with high strength polypropylene mesh cover
€9.02
ESHASTICK P-AR
EshaStick P-AR self-adhesive membranes are advanced bituminous waterproofing felts made of SBS polymer modified bitumen, which exhibits impressive elasticity and enhanced viscoelastic properties even at very low temperatures (-20°C)
€8.50
ESHASTICK PAL
ESHASTICK ALPES is an advanced-technology selfadhesive elastomeric bituminous waterproofing felt. It is produced from SBS modified bitumen which exhibits impressive elasticity and enhanced viscoelastic properties even at very low temperatures (-40° C)
€13.85
ESHASTICK PG
ESHASTICK PG self-adhesive membranes are advanced bituminous waterproofing membranes made of SBS polymer modified bitumen, which exhibits impressive elasticity and enhanced viscoelastic properties even at very low temperatures (-20°C)
€12.04
ESHASTICK PP
ESHASTICK PP self-adhesive membranes are advanced bituminous waterproofing membranes made of SBS polymer modified bitumen, which exhibits impressive elasticity and enhanced viscoelastic properties even at very low temperatures (-20°C)
€9.57
ESHASTICK TUB
EshaStick TUB is an elastomeric bituminous waterproofing self-adhesive tape of advanced-technology. It is produced from SBS modified bitumen which exhibits impressive elasticity even at very low temperatures (-30 °C). Its top cover is LDPE film with high strength and elasticity (acts also as reinforcement) and its bottom cover is a silicone release film
€10.18
ESHASTICK ULTRA WHITE
ESHASTICK ULTRA WHITE self-adhesive membranes are advanced bituminous waterproofing membranes made of SBS polymer modified bitumen, which exhibits impressive elasticity and enhanced viscoelastic properties even at very low temperatures (-20°C)
€16.69
ESHATAPE
EshaTape is an elastomeric bituminous waterproofing self-adhesive tape of advanced-technology. It is produced from SBS modified bitumen which exhibits impressive elasticity even at extremely low temperatures (-40 °C). Its top cover is polyester aluminium film with high elasticity and mechanical strength (acts also as EshaTape’s reinforcement) and its bottom cover is a silicone release film.
€11.40
ESHATAPE ALU FLEX
ESHATAPE ALU FLEX are waterproofing tapes based on synthetic butylene with self-adhesive properties. They are coated with corrugated aluminum (red-colored) and a bottom finish of silicon release film
€34.20
ESHATERRA
EshaTerra 50 is a polyester reinforcement for bituminous coating layers. Weight: 50 gr/m2
€1.32
ESHATHIOSEAL 200E
ESHATHIOSEAL-200 E is a high-grade elastomeric kerosine resistant, two component (A+B) POLYSULPHIDE sealant, for horizontal joints. It provides a permanently elastic jointing compound capable of accommodating a joint movement greater than 25% at temperatures up to 60 oC
€0.00
ESHATHIOSEAL A+B
ESHATHIOSEAL (A+B) is a high-grade elastomeric two component (Α+Β) POLYSULPHIDE Sealant. When cured, it provides a permanently elastic jointing compound capable of accommodating a joint movement larger than 25%
€12.94
ESHATOPRIMER
ESHA ToPrimer is a high grade eco-friendly elastomeric waterproofing bituminous primer. It belongs to ESHA’s new generation technology of water based primers, that combines the best features of traditional solvent primers (fast drying, durability, easy application) while being environmentally and user friendly (VOC’s FREE)
€2.10
ESHAVENT
EshaVent is a self-adhesive bituminous waterproofing membrane that possesses most effective ventilating characteristics. It is produced from SBS modified bitumen which exhibits impressive elasticity and enhanced viscoelastic properties even at very low temperatures (-15 °C), and special additives that give the membrane self-adhesive properties, hence the ability to stick very easily to a suitably prepared substrate without the need of a torch
€10.25
FIAMMA BELL HEAD 60mm
Bell Head for torch FIAMMA 1, diameter 60mm
€32.00
FIBERGLASS MESH
Alkaline fiberglass mesh FIBERGLASS for use as reinforcement: in external thermal insulation applications in plasters for indoor or outdoor use in facade renovations
€0.00
FLAT AIR VENT
€0.00
Flat nails for asphalt tiles
€7.05
FPO CLEANER
Product for preparation & cleaning of seams between FPO membranes before the use of hot air for their bonding
€0.00
FPO COATED PLATE
Metal sheets coated with FPO same as membrane, suitable for the construction of various types of profiles end on membrane in vertical and horizontal elements (piece 2 m x 1 m)
€0.00
FPO CONICAL BASE FITTING
Prefabricated special conical piece from FPO for customization of pipes and cables
€0.00
FPO HORIZONTAL DRAIN Φ 110
FPO HORIZONTAL DRAIN Φ 110 is available for purchase in increments of 1
€0.00
FPO INSIDE CORNERS
Internal prefabricated FPO corner for interior roof angles. Used as an accessory of SYNTEC FPO membranes, to ensure waterproofing in interior roof angles
€0.00
FPO OUTSIDE ANGLES
External prefabricated FPO corner, for exterior roof angles. Used as an accessory of SYNTEC FPO membranes, to ensure waterproofing in exterior roof angles
€0.00
FPO VERTICAL DRAIN Φ 125
Prefabricated Roof Drain head from FPO, for use in vertical Roof Drain
€0.00
GEOTEXTILES DTF
Geotextiles DTF are Polyester needlepunched nonwooven geotextiles, without chemical binders, with great mechanical strength
€0.70
GOK-PLUS TELESCOPE TELESCOPE WITH ADDITIONAL FIXING FEATURE
Telescopic connector for fixing insulation layers to the flat roofs. Additional fixing feature in the shape of 3 securing points (thorns) increases the load capacity. This is especially important while using wide, single layer water proof membranes
€0.09
GREENLINER 45D EDGE RETAINING PROFILE
The GreenLiner Edge Retaining Profile is used as an edging between vegetated and vegetation free or paved zones. The profile can create a perfect straight edge or can become flexible by removing the noggins, allowing the GreenLiner to be laid to curves
€17.13
JOINT FILLING CORDS
Joint filling cords from expanded polyethylene. They are positioned in the joint before joint sealant
€0.16
KATOPTRON 2D
€5.92
KATOPTRON S
€4.75
KOELNER KI
KOELNER KI: Facade fixing with plastic pin of different lengths for external thermal insulation applications
€0.00
KOELNER TELESCOPE GOK
Telescopic connector for fixing insulation layers to the flat roofs. Circular plate eliminates the need of positioning the fixing during the installation, this is indispensable when using fixings with oval plate
€0.09
KOELNER TFIX 8M
KOELNER TFIX 8M: facade fixing for thermal insulation boards or with metal pin, of different lengths for external thermal insulation applications
€0.31
LAP TORCH
This torch has been designed for the dry application of modified bitumen membranes, when the membrane is not applied to the surface, but only welded on the overlaps.The lap torch is equipped with piezoelectric ignition
€606.00
LEAF GRATE 4 POLES
Leaf grate with 4 poles for roof drains from Φ60 -110
€3.54
LEAF GRAVEL
Leaf-grate and/or gravel-grate suitable for roof drains from Φ60 - 200 packaging: 50pieces/box
€5.98
MARSIPUS EPS-70
Expanded polystyrene (EPS) is a lightweight thermal insulation material with closed cells. used in construction due to its properties as a lightweight thermal insulation material (gives the best coefficient of thermal conductivity ("λ") with excellent strength
€0.00
MARSIPUS EPS-90
Expanded polystyrene (EPS) is a lightweight thermal insulation material with closed cells. used in construction due to its properties as a lightweight thermal insulation material (gives the best coefficient of thermal conductivity ("λ") with excellent strength
€0.00
MARSIPUS EPS-90 NEOGRAPH
Expanded polystyrene (EPS) is a lightweight thermal insulation material with closed cells. used in construction due to its properties as a lightweight thermal insulation material (gives the best coefficient of thermal conductivity ("λ") with excellent strength
€1.00
MARSIPUS XPS (FL) FLOORS
Extruded polystyrene thermal insulation boards MARSIPUS are thermal insulating material (XPS) produced from polystyrene and suitable blowing agents by the process of continuous extrusion thus forming a continuous board at the desired thickness (20-100 mm). This is then cut and packed in various dimensions and shapes regarding surface and edges
€12.41
MARSIPUS XPS (GF)
Extruded polystyrene thermal insulation boards MARSIPUS are thermal insulating material (XPS) produced from polystyrene and suitable blowing agents by the process of continuous extrusion thus forming a continuous board at the desired thickness (20-100 mm)
€0.00
MARSIPUS XPS (PR) UNDERTILE
Extruded polystyrene thermal insulation boards MARSIPUS are thermal insulating material (XPS) produced from polystyrene and suitable blowing agents by the process of continuous extrusion thus forming a continuous board at the desired thickness (20-100 mm). This is then cut and packed in various dimensions and shapes regarding surface and edges
€10.52
MARSIPUS XPS (RF) ROOFS
Extruded polystyrene thermal insulation boards MARSIPUS are thermal insulating material (XPS) produced from polystyrene and suitable blowing agents by the process of continuous extrusion thus forming a continuous board at the desired thickness (20-100 mm). This is then cut and packed in various dimensions and shapes regarding surface and edges
€8.27
MARSIPUS XPS (SP) COOLING ROOMS
Extruded polystyrene thermal insulation boards MARSIPUS are thermal insulating material (XPS) produced from polystyrene and suitable blowing agents by the process of continuous extrusion thus forming a continuous board at the desired thickness (20-100 mm). This is then cut and packed in various dimensions and shapes regarding surface and edges
€18.18
MARSIPUS XPS (ST) EXTERNAL INSULATION
Extruded polystyrene thermal insulation boards MARSIPUS are thermal insulating material (XPS) produced from polystyrene and suitable blowing agents by the process of continuous extrusion thus forming a continuous board at the desired thickness (20-100 mm). This is then cut and packed in various dimensions and shapes regarding surface and edges
€9.92
MARSIPUS XPS (TL) COMPOSITE THERMAL INSULATION TILE
Marsipus XPS (TL) is a prefabricated XPS thermal insulation tile. It is composed of Marsipus RF XPS thermal insulation board 5 cm thick and a cover of white rugged polymer cement mortar 1 cm thick
€62.80
MARSIPUS XPS (WL) WALL
Extruded polystyrene thermal insulation boards MARSIPUS are thermal insulating material (XPS) produced from polystyrene and suitable blowing agents by the process of continuous extrusion thus forming a continuous board at the desired thickness (20-100 mm). This is then cut and packed in various dimensions and shapes regarding surface and edges
€8.87
MARSIPUS XPS (WRS)
Extruded polystyrene thermal insulation boards MARSIPUS are thermal insulating material (XPS) produced from polystyrene and suitable blowing agents by the process of continuous extrusion thus forming a continuous board at the desired thickness (20-100 mm). This is then cut and packed in various dimensions and shapes regarding surface and edges
€8.87
MOUNTING BAR
Perforated metal plates with a total length of 3m, shaped inwards with a roller for the mechanical support of the FPO membrane
€0.00
ND RS VARIO GRID
Metal Ispection Champer's grid Lid LxWxH: 30cm x 30 cm x 2,5 cm
€169.11
ND RS-VARIO BASIC INSPECTION CHAMBER
Metal Ispection Champer LxWxH: 30cm x 30 cm x 8 cm
€212.63
ND RSA-10 EXTENSION ELEMENT
Metal Extenstion Element for Inspection Champer LxWxH: 30cm x 30 cm x 10 cm
€103.76
ND RSA-20 EXTENSION ELEMENT
Metal Extenstion Element for Inspection Champer LxWxH: 30cm x 30 cm x 20 cm
€136.50
NEW LEAF GRATE
Leaf-grate suitable for roof drains from Φ75 -125
€2.62
NOPHADRAIN 100
High-performance CE-marked drainage system made out of recycled high impact polystyrene. The core of the ND Drainage System is a dimpled sheet with a high compressive strength and a construction height of approx. 8 mm
€15.75
NOPHADRAIN 200
High-performance CE-marked drainage system with an innovative dimple design made out of recycled high impact polystyrene. The core of the ND Drainage System is a dimpled sheet with a high compressive strength and a construction height of approx. 12.5 mm
€19.53
NOPHADRAIN 600
High-performance CE-marked drainage system with an innovative dimple design made out of recycled high impact polystyrene. The core of the ND Drainage System is a dimpled sheet with a very high compressive strength and a construction height of approx. 12.5 mm
€28.69
NOPHADRAIN ND 4+1
High-performance CE-marked drainage system with an innovative dimple design made out of recycled High Impact Polystyrene. The core of the ND Drainage System is a perforated, vapourpermeable dimpled sheet with a high compressive strength, a construction height of approx. 12,5 mm
€23.46
NOPHADRAIN ND 4+1 H
High-performance CE-marked drainage system with an innovative dimple design made out of recycled High Impact Polystyrene. The core of the ND Drainage System is a perforated, vapourpermeable dimpled sheet with a high compressive strength, a construction height of approx. 12,5 mm
€24.67
NOPHADRAIN ND 5+1
High-performance CE-marked drainage system with an innovative dimple design made out of recycled high impact polystyrene. The core of the ND Drainage System is a perforated, vapourpermeable dimpled sheet with a high compressive strength, a construction height of approx. 27.5 mm and a water reservoir of approx. 5.8 l/m²
€29.55
Nozzle for VANDEX IC
Nozzle for VANDEX IC (length 35 cm and 100cm)
€56.04
Perforated drainage pipe with geotextile
Perforated drainage pipe with geotextile (sock), for water drainage. Diameter Φ=125mm
€10.68
PIPE FITTING
Special accessory for waterproofing around pipes and cables that penetrate bituminous waterproofing layers.They are made of elastic, plastic material, fully compatible with the bituminous waterproofing membrane, and with high resistance to sunlight
€3.96
PLANTING LAYER ESHAOXYGEN GM
EshaOxygen GM is planting substrate that has been created according to the specifications of P.E.E.G.E.P. (Panhellenic Association of Green Agricultural Contractors Companies). It is much lighter than the traditional garden soil, it drains easily and is enriched with organic elements for the nutrition of the expansive type plants
€200.25
PLASTOX III
PLASTOX 1 is a thermoplastic bituminous adhesive for bituminous membranes. It conforms with the standard specification ASTM D-312 Type III
€1.58
PVC CORNER BEAD FIBERGLASS
Corner Bead made of PVC with Fiberglass mesh, length of 2,5m for protection of the corner: application of external insulation in rendering, internal or external application in facade renovations
€0.96
PVC ROOF DRAIN
Universal anti-backup roof drain is one of the best systems for connecting rainwater pipes and drains on flat roofs, gutters of multi-pitched roofs, and industrial buildings. It is particularly suitable for use with all kinds of APP or SBS modified bituminous membranes as well as liquid bitumen coatings
€8.96
ROLL PULLER
Special stick for pulling waterproofing membranes roll during application. Ideal for avoiding "footprinting" phenomenon
€88.00
ROLLER PRESSURE SEAM 8 Kg
8 kg pressure seam roller with CENTRAL handle: It is an iron roller of about 8 kg with a central handle, which allows the user to stand upright while pressing the seams of the membranes, after having heated them, so as to obtain a perfect bond between them
€224.00
SCREW WO-48060
nsulation screws Jigsaws pointed WO by Koelner. For sheet metal up to 0.9mm and insulation thickness: 80-120 mm dimensions: 4.8x60 mm
€0.06
SCREW WX-48050
Self-drilling insulation screw, milling cutter, with drill WX-48050, 4.8 x 50 mm, for sheet metal up to 1.25 mm and insulation thickness 80-120 mm. Available in a package of 250 pcs
€0.07
SCREWS WO-48050
Ιnsulation screws Jigsaws pointed WO by Koelner. For sheet metal up to 0.9mm and insulation thickness: 80-120 mm dimensions: 4.8x50 mm
€0.06
SMART ROOF HEXAGON
€8.86
SMART ROOF STANDARD (SQUARE)
€9.36
SMART ROOF TRADITIONAL (curved)
€9.23
SUBSTRATE PANEL 120/50
SM 120/50 are special, water-absorbing and hydrophilic mineral wool pane with a density of 120 kg/m³ and a thickness of 50 mm. Due to its nature, it has the ability to absorb a lot of water in its mass during watering and to gradually return it to the garden
€38.14
SUBSTRATE PANEL 80/50
SM 80/50 are special, water-absorbing and hydrophilic mineral wool pane with a density of 80 kg/m³ and a thickness of 50 mm. Due to its nature, it has the ability to absorb a lot of water in its mass during watering and to gradually return it to the garden
€30.18
TEMPRA (Vapotherm) THERMAL INSULATION POLYURETHANE FOAM BOARDS
TEMPRA thermal insulation Polyurethane foam boards are produced by VAPOTHERM HELLAS LTD (daughter company to Alfa Alfa Energy SA). The unique structure of TEMPRA PU boards, with uniform closed cells with sound walls, ensures a very low coefficient of thermal conductivity (λ = 0,024 Kcal / h m o C), hence superior thermal insulation result
€11.62
THE METHOD Esha-Izoton
The method Esha-Izoton is used to seal the deck of concrete bridges before applying asphalt pavement. Asphalt laying is performed directly on Esha-Izoton membrane. Due to the fact that Esha-Izoton is applied as a melt, it demonstrates excellent adhesion even in the cases where the bridge concrete-deck surface is not smooth or uneven
€0.00
TORCH KIT FIAMMA 1 480 COMPLETE
Professional Torch kit, type FIAMMA I diameter 50mm, length 480mm and rubber length of 10m
€160.00
TORCH KIT FIAMMA I 220 COMPLETE
Professional Torch kit, type FIAMMA I diameter 50mm, length 220mm and rubber length of 10m
€158.00
TORCH KIT ROOFSTAR 1 TITANIUM 220 COMPLETE
Professional Torch Kit, type ROOF STAR 1 TITANIUM made of lightweight Titanium, diameter 50mm, length 220mm and rubber length 10m
€252.00
TORCH KIT ROOFSTAR 1 TITANIUM 480 REPLACEMENT
Replacement part of Torch, type ROOFSTAR 1 TITANIUM, made of Titanium, diameter 60mm and length 480mm (rubber not included)
€203.00
TORCH MULTIHEAD ROOFING TOOL
Multi-head torch roofing tool with 7 bell heads Ø 40 mm complete kit This machine is suitable for waterproofing very big surfaces, such as bridges, viaducts and so on recommended particularly for flat surfaces, where the membrane must be perfectly bonded to the underlying material
€1,547.00
Tube AIR VENT
€0.00
UNIVERSAL ROOF DRAIN (IM)
Universal anti-backup roof drain is one of the best systems for connecting rainwater pipes and drains on flat roofs, gutters of multi-pitched roofs, and industrial buildings. It is particularly suitable for use with all kinds of APP or SBS modified bituminous membranes as well as liquid bitumen coatings
€7.44
URDIN ADH FPO
Adhesive suitable for bonding FPO film to a substrate
€0.00
URTOP MAT 1.5
URTOP MAT is a synthetic waterproof sheet whose composition is based on a polyolefin (FPO) product of advanced polymerization process, dimensionally stabilized with a glass fiber mesh. UV resistant
€0.00
URTOP MAT 1.8
URTOP MAT is a synthetic waterproof sheet whose composition is based on a polyolefin (FPO) product of advanced polymerization process, dimensionally stabilized with a glass fiber mesh. UV resistant
€0.00
URTOP MAT 2.0
URTOP MAT is a synthetic waterproof sheet whose composition is based on a polyolefin (FPO) product of advanced polymerization process, dimensionally stabilized with a glass fiber mesh. UV resistant
€0.00
URTOP MP 1.5
URTOP MP is a synthetic waterproof sheet whose composition is based on polyolefin (FPO) product of advanced polymerization process, combined with polyester reinforcement. UV resistant
€0.00
URTOP MP 2.0
URTOP MP is a synthetic waterproof sheet whose composition is based on polyolefin (FPO) product of advanced polymerization process, combined with polyester reinforcement. UV resistant
€0.00
URTOP SA UNREINFORCED 1.5
URTOP SA UNREINFORCED 1.5 is a synthetic waterproof, unreinforced sheet whose composition is based on polyolefin (FPO) product of advanced polymerization process suitable for waterproofing details
€0.00
VANDEX AM10
VANDEX LEVELLING COMPOUND LC is a cementitious, polymer modified, ready-mixed levelling compound
€3.46
VANDEX BB 75Z
Waterproofing slurry for sewage treatment plants
€2.15
VANDEX BB WHITE
VANDEX BB WHITE is a cementitious, ready-mixed surface waterproofer
€2.68
VANDEX BB75
VANDEX BB 75 is a cementitious, ready-mixed surface waterproofer
€2.04
VANDEX CEMELAST 100
VANDEX CEMELAST 100 is a 2-component, polymer modified, cementitious waterproofing slurry. It consists of VANDEX CEMELAST 100 POWDER (dry component) and VANDEX CEMELAST LIQUID (polymer component)
€3.38
VANDEX CORROSION PROTECTION M
€0.00
VANDEX IC
VANDEX IC is a water-based ready-to-use silane/siloxane microemulsion cream that provides a barrier against rising damp
€49.55
VANDEX LEVELLING COMPOUND LC
€2.35
VANDEX PLUG
A cementitious, ready-mixed, rapid setting compound to stop water and moisture ingress
€5.00
VANDEX RAPID 2
A cementitious, ready-mixed, rapid setting compound to stop water and moisture ingress
€6.15
VANDEX RAPID M
VANDEX RAPID M is a cementitious, ready-mixed repair mortar resistant to water and moisture
€2.57
VANDEX RAPID S
€3.13
VANDEX RAPID XL
VANDEX RAPID XL is a cementitious, ready-mixed, one component, fibre reinforced, rapid setting reprofiling mortar
€1.82
VANDEX REPAIR MORTAR 05
€0.00
Vandex Repair Mortar HB
€2.63
VANDEX SUPER
VANDEX SUPER is a cementitious, ready-mixed, in-depth waterproofer. VANDEX SUPER is based on grey Portland cement
€3.18
VANDEX SUPER WHITE
VANDEX SUPER WHITE is a cementitious, ready-mixed, indepth waterproofer. VANDEX SUPER WHITE uses white cement as binding agent
€3.46
VANDEX UNIMORTAR 1
VANDEX UNI MORTAR 1 is a cementitious, ready-mixed waterproofing and repairing mortar
€1.68
VANDEX UNIMORTAR 2
VANDEX UNI MORTAR 2 is a cementitious, ready-mixed waterproofing and repairing mortar
€1.73
VC CORNER BEAD WITH WATER DRIP EDGE
Corner Bead made of PVC and alkaline fiberglass mesh with water drip edge, length 2,0m. application of external insulation in rendering, internal or external application in facade renovations
€1.72
VERTICAL ROOF DRAIN
Universal anti-backup roof drain is one of the best systems for connecting rainwater pipes and drains on flat roofs, gutters of multi-pitched roofs, and industrial buildings. It is particularly suitable for use with all kinds of APP or SBS modified bituminous membranes as well as liquid bitumen coatings
€7.69
WATERSTOP C.E.
Elastic waterstop tape, from PVC, suitable for external application of construction joints, with 2 anchors on each side. Packing: In rolls of 25 m, Width: 24 cm, Rolls/Pallet:12
€11.54
WATERSTOP C.I.
Elastic waterstop tape, from PVC, suitable for intermediate application of construction joints, with 3 anchors on each side. Packing: In rolls of 25 m, Width: 24 cm, Rolls/Pallet:12
€9.21
WATERSTOP E.E.
Elastic waterstop tape, from PVC, suitable for external application of dillatation and working joints, with expansion valve and 2 anchors on each side. Packing: In rolls of 25 m, Width: 24 cm, Rolls/pallet:12
€13.22
WATERSTOP E.I.
Elastic waterstop tape, from PVC, suitable for dillatation and working joints, with expansion valve and 3 anchors on each side
€10.56

esha.gr

AIR VENT

ANGLED ROOF DRAIN WITH RECTANGULAR INTERSECTION

BASE FOR SLABS 15 mm WITH HOLE

BEBIT G & BEBIT G PLUS

BITUMINOUS EMULSION ESHABIT JP

Bituminous Emulsion ESHACOAT-PME-S-C60BP5 – suitable for slurry sealing and microsurfacing

BITUMINOUS EMULSION ΚΕ1 – suitable for tack coats

BITUMINOUS EMULSION ΚΕ2 – suitable for sealing coats and aggregate coating

BITUMINOUS EMULSION ΚΕ5 – suitable for impregnation of road bases

BOARD POW

CEMELAST LIQUID

CURVE Φ100 100×100

DANODREN H15 PLUS

DANOPOL FV

DANOPOL HS

DANOSA COLAMINATED BOARD

DANOSA GLUE DAN PVC

DANOSA PVC EXTERNAL CORNER

DANOSA PVC INTERNAL CORNER

DANOSA PVC LIQUID

DANOSA THF

DRAIN E 400

DRENOTEX

ESHA GEO

ESHA PERIMETRIC FILLET

ESHA ROAD LIFT

ESHA UNIVERSAL

ESHA-IZOTON PRIMER – suitable for tack coat of bridge Deck wateroroofing system

ESHABAR-PARAPET FIXING BAR

ESHABOND

ESHACOAT 6S

ESHACOAT No2

ESHADACH 150

ESHADACH 170

ESHADACH 95

ESHADESMOBIT 1K

ESHADESMOBIT 2K

ESHADESMOLAST

ESHADESMOLAST HRD

ESHADESMOLAST PRIMER AQUA 2K

ESHADESMOLAST PRIMER PU

ESHADESMOLAST PRIMER PUB 2K

ESHADESMOLAST TR

ESHADESMOSEAL

ESHADESMOTHINNER

ESHADESMOTOP

ESHADIEN (SBS -20°C)

ESHADIEN Antiroot B5 (SBS -20°C)

ESHADIEN GEO (SBS -20°C)

ESHADIEN SP GEO (SBS -20°C)

ESHADIEN ULTRA WHITE (SBS -20°C)

ESHADRAIN 400

ESHADRAIN 500

ESHADRAIN R20 GARDEN

ESHADURO (APP -5°C)

ESHADURO (APP -5°C) Red Granule

ESHAELASTAN (SBS -15°C)

ESHAELASTAN S (SBS -20°C)

ESHAELASTIC

ESHAEPOGRAN

ESHAEPOXYTAR

ESHAFAST

ESHAFILL

ESHAFIN (SBS -10°C)

ESHAFLEX 2K/EL

ESHAFX

ESHAFX PRIMER

ESHAFX TOP A

ESHAFX TOP S

ESHAGUM (APP -10°C)

ESHAGUM Antiroot B5 (APP -10°C)

ESHAGUM SP (APP -10°C)

ESHAGUM SP-FR (-15°C)

ESHAHYBRID

ESHAHYDROBENT

ESHAIZOTON APJ

ESHALAC 50S

ESHALAS – PREFABRICATED, SELF-ADHESIVE, COLD APPLIED BITUMEN-POLYMER SEALING & CONNECTION STRIP

ESHALUMIN

ESHADIEN SP GEO
(SBS -20°C)