BITUMINOUS EMULSION ΚΕ2 – suitable for sealing coats and aggregate coating

ESHA bituminous emulsions consist of small bitumen droplets, 1-10 microns, dispensed in an aqueous continuous phase. Bituminous emulsions are used in the road building sector, as well as in the Runways’ construction. Curing procedure starts as soon as they are applied on either the road surface or the aggregates and finally the remaining bitumen acts as binder.

You can download technical brochures by clicking at the following button:

Share

Description

ESHA bituminous emulsions consist of small bitumen droplets, 1-10 microns, dispensed in an aqueous continuous phase. Bituminous emulsions are used in the road building sector, as well as in the Runways’ construction. Curing procedure starts as soon as they are applied on either the road surface or the aggregates and finally the remaining bitumen acts as binder.

Curing speed, depends on several factors, such as:

  • Emulsion type
  • Aggregate nature
  • Gradation of the aggregates
  • Weather conditions & aggregates moisture

According to GR-PTP A-202, GR-PTP A-203 and EN 13808 following types of road building bituminous emulsions are available:

Bituminous Emulsion ΚΕ-2: Rapid setting Cationic bitumen emulsion of higher viscosity, with 58-65% bitumen content, suitable for sealing coats and aggregate coating

ESHA bituminous emulsion are available:

  • Plastic or Metalic barrels of 210 Κg
  • Plastic tanks of 1.000 Κg
  • loose (full truck tanks) 24.000 Κg

Esha bituminous emulsion are ready for use. No dillution needed. STIR WELL BEFORE USE

Shopping Basket

Εγγραφή Συνεργάτη

Ορίστε το pin της επιλογής σας