Bituminous Emulsion ESHACOAT-PME-S-C60BP5 – suitable for slurry sealing and microsurfacing

ESHA bituminous emulsions consist of small bitumen droplets, 1-10 microns, dispensed in an aqueous continuous phase. Bituminous emulsions are used in the road building sector, as well as in the Runways’ construction. Curing procedure starts as soon as they are applied on either the road surface or the aggregates and finally the remaining bitumen acts as binder.

Share

Description

ESHA bituminous emulsions consist of small bitumen droplets, 1-10 microns, dispensed in an aqueous continuous phase. Bituminous emulsions are used in the road building sector, as well as in the Runways’ construction. Curing procedure starts as soon as they are applied on either the road surface or the aggregates and finally the remaining bitumen acts as binder.

Curing speed, depends on several factors, such as:

  • Emulsion type
  • Aggregate nature
  • Gradation of the aggregates
  • Weather conditions & aggregates moisture

According to GR-PTP A-202, GR-PTP A-203 and EN 13808 following types of road building bituminous emulsions are available:

BituESHACOAT-PME-S-C60BP5: Medium setting elastomeric cationic bituminous emulsion with 60% min pmb binder content. It is suitable for slurry sealing, microsurfacing, or special tack coating, where ultimate inter layer elastic adhesion is of high importance and best aggregates and reinforcing meshes ancoring is necessary.

ESHA bituminous emulsion are available:

  • Plastic or Metalic barrels of 210 Κg
  • Plastic tanks of 1.000 Κg
  • loose (full truck tanks) 24.000 Κg

Esha bituminous emulsion are ready for use. No dillution needed. STIR WELL BEFORE USE

Shopping Basket

Εγγραφή

Ορίστε το pin της επιλογής σας