Showing all 33 results

• 

  BEBIT G & BEBIT G PLUS

  BEBIT asphalt reinforcement grids are made out of glass fi bers with a melting point of more than 850˚C due to their specifi c properties, BEBIT G and BEBIT G plus asphalt reinforcement grids can take high tensile stress and also qualify for their low elongation
  €0.00
• 

  BITUMINOUS EMULSION ESHABIT JP

  ESHA bituminous emulsions consist of small bitumen droplets, 1-10 microns, dispensed in an aqueous continuous phase. Bituminous emulsions are used in the road building sector, as well as in the Runways’ construction
  €0.00
• 

  Bituminous Emulsion ESHACOAT-PME-S-C60BP5 – suitable for slurry sealing and microsurfacing

  ESHA bituminous emulsions consist of small bitumen droplets, 1-10 microns, dispensed in an aqueous continuous phase. Bituminous emulsions are used in the road building sector, as well as in the Runways’ construction
  €0.00
• 

  BITUMINOUS EMULSION ΚΕ1 – suitable for tack coats

  ESHA bituminous emulsions consist of small bitumen droplets, 1-10 microns, dispensed in an aqueous continuous phase. Bituminous emulsions are used in the road building sector, as well as in the Runways’ construction
  €0.42
• 

  BITUMINOUS EMULSION ΚΕ2 – suitable for sealing coats and aggregate coating

  ESHA bituminous emulsions consist of small bitumen droplets, 1-10 microns, dispensed in an aqueous continuous phase. Bituminous emulsions are used in the road building sector, as well as in the Runways’ construction
  €0.42
• 

  BITUMINOUS EMULSION ΚΕ5 – suitable for impregnation of road bases

  ESHA bituminous emulsions consist of small bitumen droplets, 1-10 microns, dispensed in an aqueous continuous phase. Bituminous emulsions are used in the road building sector, as well as in the Runways’ construction
  €0.49
• 

  DRENOTEX

  DRENOTEX geotextiles are Polyester needlepunched nonwooven geotextiles, without chemical binders, with great mechanical strength. They are produced by Freudenbergpolitex and are represnted to Greek Maket by ESHA
  €0.70
• 

  ESHA ROAD LIFT

  Esha Road-Lift is rapid setting modified bituminous emulsion, designed for selaing capillary cracks that appear on old asphalt pavements, while stabilizing loose aggregates, restoring asphalt pavement to its prior condition. As a result extend life cycle and service life of asphalt pavement, is achieved
  €2.10
• 

  ESHA-IZOTON PRIMER – suitable for tack coat of bridge Deck wateroroofing system

  ESHA bituminous emulsions consist of small bitumen droplets, 1-10 microns, dispensed in an aqueous continuous phase. Bituminous emulsions are used in the road building sector, as well as in the Runways’ construction. Curing procedure starts as soon as they are applied on either the road surface or the aggregates and finally the remaining bitumen acts as binder
  €0.00
• 

  ESHABOND

  ESHABOND is an acrylic dispersion for concrete and mortar modification which improves mortar properties
  €1.00
• 

  ESHAEPOGRAN

  EshaEpogran is a general purpose self priming 2 component coal tar epoxy adhesive for metals, concrete, road reflectors (cat’s eyes), filling up small road joints and cracks etc. It exhibits an excellent adhesion & abrasion resistance and is highly recommended for seawater under surface service
  €0.00
• 

  ESHAEPOXYTAR

  ESHAEPOXYTAR is a two part pitch-tar epoxy coating with anticorrosive, antirust and waterproofing properties. It can be applied to metal and concrete surfaces. It forms a black, hard surface, resistant to acid and alkali solutions, saline water, petroleum products etc
  €17.92
• 

  ESHAFILL

  ESHAFILL is a ready to use cold asphalt mix and it is used to restore small damages on pavements and small pot holes. It consists of a special asphalt binder with elastic properties, special graded aggregates and special additives which give ESHAFILL excellent workability, substrate adhesion, and cohesiveness
  €0.44
• 

  ESHAGUM SP (APP -10°C)

  ESHAGUM SP are plastomeric waterproofing membranes for waterproofing concrete Bridge-Deck and underground structures
  €11.77
• 

  ESHAIZOTON APJ

  ESHA-IZOTON-APJ System is a hot, in situ application system for waterproofing and sealing transverse joints ofmetal or concrete bridges, consisting of a combination of special grading of hard aggregates and special elastomeric bituminous binder, to form a box-shaped gasket that overlaps the underlying bridge cross-section at least 25 cm wide on either side of its longitudinal axis
  €0.00
• 

  ESHALAS – PREFABRICATED, SELF-ADHESIVE, COLD APPLIED BITUMEN-POLYMER SEALING & CONNECTION STRIP

  ESHALAS is an elasto-plastic jointing strip made of bitumen modified with «SBR» type thermoplastic elastomers, extruded, preformed and industrially prefabricated, self-adhesive, cold applied, ready for use
  €0.00
• 

  ESHAMODIBIT

  ESHAMODIBIT G3045 is a durable asphaltic binder for roads and mainly for base courses, where high stiffness is required. Even though EshaModibit has a considerably lower penetration, it can be compacted at the same or even lower temperature than the conventional asphalt mix, making it the most environmentally friendly as well as cost effective binder solution for paving
  €0.00
• 

  ESHAPOLYPHALT A+B

  ESHAPOLYPHALT is a cold applied high grade, self levelling, elastomeric, two component (Α+Β) POLYURETHANE–BITUMEN Sealant. When cured, it provides a permanently and highly elastic jointing compound capable of wιth standing a joint movement larger than 25%
  €6.80
• 

  ESHAPOLYSEAL 1K

  ESHAPOLYSEAL 1K is a thixotropic one component gun-grade polyurethane-based sealant that becomes elastomeric & rigid after air contact
  €5.38
• 

  ESHAPOLYSEAL A+B

  ESHAPOLYSEAL (A+B) is a high grade, self levelling, elastomeric,two component (Α+Β) POLYURETHANE sealant. When cured, it pro- vides a permanently elastic jointing compound capable of wιth- standing a joint movement larger than 25%. ESHAPOLYSEAL (A+B) is a two component (Α+Β) self levelling sealant. The two components are mixed at a ratio 3,1:1 (w/w). Polymerization leads to a polyurethane rubber material. ESHAPOLYSEAL (A+B), when cured, remains elastic within the temperature range of -30° C to 100°C
  €14.12
• 

  ESHAPRENE – high-quality elastomeric asphaltic binder for road applications

  ESHAPRENE is a high-quality elastomeric asphaltic binder for road applications, modified with SBS thermoplastic polymer.It fullfills ΕΝ-14023
  €0.00
• 

  ESHAPRENE XS- high-quality elastomeric asphaltic binder for road applications – New generation

  ESHAPRENE XS is the 2nd generation of Elastomeric asphaltic binder for Road applications with enchanced antikerosine properties. It is even more environmentally friendly than EshaPrene, as it is designed to be applied at lower working tempetarures, while retaining or even improving its high quality attributes.It fullfills ΕΝ-14023. FRIENDLY TO THE ENVIRONMENT
  €0.00
• 

  ESHAPROOF SP (ΑΡΡ -7οC)

  ESHAPROOF SP are plastomeric waterproofing membranes for waterproofing concrete Bridge-Deck and underground structures. ESHAPROOF SP are produced with special types of bitumen and selected polymer materials based on polypropylene (APP). Its special composition offer longlasting impermeability, protection and endurance of Bridgedeck even at low temperature
  €0.00
• 

  ESHASEALACRYL

  ESHASEALACRYL is one component highly elastic sealant based on acrylic resins in aqueous dispersion, with high resistance to UV radiation and weather conditions. After application water evaporates and sealant turn into a cohesive plastoelastic mass which adhere to the sides of the joint. ESHASEALACRYL can be painted with normal use paints after curing
  €2.28
• 

  ESHASEALER No1

  ESHASEALER Νο1 is a cold applied bituminous plastic mastic for horizontal and vertical joint sealing. It forms a hard surface while it remains plastic in its bulk. It has good adhesion to all common building materials and is able to accommodate normal movement
  €2.25
• 

  ESHASEALER No164

  ESHASEALER 164 is an elastomeric, hot poured bituminous Sealant. It provides a permanently elastic jointing compound capable of accommodating a joint movement larger than 20%
  €1.84
• 

  ESHASEALER No164 EAK

  ESHASEALER 164 is an elastomeric, hot poured bituminous Sealant. It provides a permanently elastic jointing compound capable of accommodating a joint movement larger than 20%
  €0.00
• 

  ESHASEALER No2

  ESHASEALER Νο 2 is a cold applied bituminous plastic mastic-putty fibre reinforced for all types of waterproofing details.It can also be used for sealing minor construction materials joints of less than 1 cm wide
  €2.49
• 

  ESHASTICK HD 1.5

  ESHASTICK HD 1.5 is a self-adhesive bituminous waterproofing felt produced from SBS modified self adhesive bitumen and top finished with high strength polypropylene mesh cover
  €9.02
• 

  ESHATHIOSEAL 200E

  ESHATHIOSEAL-200 E is a high-grade elastomeric kerosine resistant, two component (A+B) POLYSULPHIDE sealant, for horizontal joints. It provides a permanently elastic jointing compound capable of accommodating a joint movement greater than 25% at temperatures up to 60 oC
  €0.00
• 

  ESHATHIOSEAL A+B

  ESHATHIOSEAL (A+B) is a high-grade elastomeric two component (Α+Β) POLYSULPHIDE Sealant. When cured, it provides a permanently elastic jointing compound capable of accommodating a joint movement larger than 25%
  €12.94
• 

  GEOTEXTILES DTF

  Geotextiles DTF are Polyester needlepunched nonwooven geotextiles, without chemical binders, with great mechanical strength
  €0.70
• 

  THE METHOD Esha-Izoton

  The method Esha-Izoton is used to seal the deck of concrete bridges before applying asphalt pavement. Asphalt laying is performed directly on Esha-Izoton membrane. Due to the fact that Esha-Izoton is applied as a melt, it demonstrates excellent adhesion even in the cases where the bridge concrete-deck surface is not smooth or uneven
  €0.00