Showing all 26 results

• 

  ESHACOAT 6S

  EshaCoat 6S is a high grade elastic bituminous waterproofing emulsion based on purified bitumen, synthetic latex, resins and additives. It is used for waterproofing of every surface and particularly concrete
  €2.06
• 

  ESHACOAT No2

  EshaCoat No2 is a bituminous emulsion with fillers, for waterproofing surfaces of most common structural elements and particularly concrete. A continuous, inflammable watertight film is formed after water evaporation, with excellent adhesion properties to the substrate
  €0.78
• 

  ESHADESMOBIT 1K

  ESHADESMOBIT 1K is one component polyurethane-bitumen waterproofing coating, for horizontal and vertical surfaces, based on elastomeric PU and bituminous resins
  €4.00
• 

  ESHADESMOBIT 2K

  ESHADESMOBIT is a two component (Α+Β) POLYURETHANE –BITUMEN waterproofing compound. When cured, it provides a permanent highly elastic bubble free, seamless membrane with strong adhesion to a wide range to all construction elements, excellent crack bridging and vapour barrier properties
  €7.58
• 

  ESHADESMOLAST

  ESHADESMOLAST is an one component elastomeric waterproofing coating for horizontal surfaces, based on hydrophobic polyurethane resins. When in contact with ground and air moisture it polymerizes and creates a flexible and coherent membrane
  €4.33
• 

  ESHADESMOLAST HRD

  ESHADESMOLAST HRD is one component, solventbased waterproofing coating for horizontal surfaces subjected to high mechanical stress, based on aliphatic polyurethane resins
  €13.01
• 

  ESHADESMOLAST PRIMER AQUA 2K

  ESHADESMOLAST PRIMER AQUA 2K is a two component water based epoxy coating. Its main use is as primer for adhesion improvement of polymer waterproofing coatings such as ESHADESMOLAST, ESHAHYBRID & ESHACRYCOAT
  €7.10
• 

  ESHADESMOLAST PRIMER PU

  ESHADESMOLAST PRIMER PU is a high grade one component polyurethane based fluid that cures with the atmospheric humidity. It’s composition is based on polyurethane elastomers
  €6.76
• 

  ESHADESMOLAST PRIMER PUB 2K

  ESHADESMOLAST PRIMER PUB 2K is a liquid, two-component, polyurethane primer for improving the adhesion of several ESHA PU based products on porous substrates. ESHADESMOLAST PRIMER PUB 2K does not contain any solvents
  €12.82
• 

  ESHADESMOLAST TR

  ESHADESMOLAST  TR is an one component, crystal clear, solvent-based, liquid applied waterproofing membrane based on aliphatic PU resins. ESHADESMOLAST TR exhibits high endurance to UV radiation (it will not yellow) and excellent mechanical, chemical resistance properties
  €18.66
• 

  ESHADESMOSEAL

  ESHADESMOSEAL is a one component, liquid-applied, silane-based, elastomeric waterproofing coating for horizontal surfaces. It cures with the air moisture and forms a strong, flexible and coherent membrane
  €11.05
• 

  ESHADESMOTHINNER

  ESHADESMOTHINNER is a thinner that contains a special blend of pure solvents. It is used as a thinner for polyurethane coatings such as ESHADESMOLAST for better and easier use
  €4.94
• 

  ESHADESMOTOP

  ESHADESMOTOP is an one component elastomeric waterproofing liquid applied membranes based on aliphatic polyurethane. It cures with the atmospheric humidity producing an elastic bubble free waterproofing & protection layer
  €12.77
• 

  ESHAELASTIC

  EshaElastic is a high grade, hyper-elastic bituminous waterproofing emulsion. It is composed of purified bitumen, synthetic elastomers, resins, and anti-stripping agents
  €3.81
• 

  ESHAFAST

  EshaFast is a bituminous varnish used mainly for priming concrete surfaces to increase bonding of bituminous waterproofing membranes, which dries fast and provides a durable and uniform waterproofing film
  €2.40
• 

  ESHAFLEX 2K/EL

  ESHAFLEX 2K-EL is an elastic bituminous two-component paste for the waterproofing of construction concrete elements. It's free from solvents and asbestos
  €1.90
• 

  ESHAHYBRID

  ESHAHYBRID  is a one-component hybrid-based elastomeric waterproofing coating. It is used for waterproofing and protection of the surfaces. Its composition is a combination of elastomeric aliphatic polyurethane and acrylic polymers. Its final hydrophobic membrane does not shrink or crack and remains flexible at large temperature changes
  €4.89
• 

  ESHALAC 50S

  EshaLac 50C is a high penetration bituminous primer (conforming with ASTM D-41). It is used mainly for priming concrete surfaces to increase bonding of bituminous waterproofing membranes
  €2.58
• 

  ESHALUMIN

  EshaLumin is a bitumen based aluminium paint designed for the protection of exposed bituminous surfaces and the anti-corrosive protection of metal surfaces. It consists of bitumen, solvents, aluminium pigments and various additives
  €5.93
• 

  ESHAPOLYBLACK

  EshaPolyblack is a water-based (new generation) elastomeric sealant for horizontal and vertical surfaces. It is a one-component, asphalt-polyurethane base suitable for waterproofing and protection
• 

  ESHAPRIMER DM

  ESHAPRIMER DM is a liquid primer for improving the adhesion of several ESHA products on non-porous substrates, based on a mixture of solvents and organofunctional silanes. It is a fast – drying, colorless liquid that does not stain the substrate
  €9.89
• 

  ESHAROOFCOAT No10

  EshaRoofcoat 10 is a high grade, hyper-elastic bituminous waterproofing solution. It is composed of purified bitumen, synthetic elastomers, resins, and anti-stripping agents. It contains toluene
  €2.83
• 

  ESHAROOFCOAT No10 ANTIROOT B5

  ESHAROOFCOAT No 10 ANTIROOT B5 is a high grade, hyper-elastic bituminous waterproofing solution. It is composed of purified bitumen, synthetic elastomers, resins, and anti-stripping agents. It contains toluene
  €4.14
• 

  ESHATERRA

  EshaTerra 50 is a polyester reinforcement for bituminous coating layers. Weight: 50 gr/m2
  €1.32
• 

  ESHATOPRIMER

  ESHA ToPrimer is a high grade eco-friendly elastomeric waterproofing bituminous primer. It belongs to ESHA’s new generation technology of water based primers, that combines the best features of traditional solvent primers (fast drying, durability, easy application) while being environmentally and user friendly (VOC’s FREE)
  €2.10
• 

  PLASTOX III

  PLASTOX 1 is a thermoplastic bituminous adhesive for bituminous membranes. It conforms with the standard specification ASTM D-312 Type III
  €1.58